What Is Ghost Immobiliser Problems And How To Use It

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized property from theft. It's discreet and doesn't require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses. This allows your vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security because of the increase in vehicle theft. There are a variety of aftermarket security devices available including tracking systems, immobilisers and alarms. However there are a few that are equally efficient in protecting your vehicle. While a tracking system can help you find your vehicle in the event of theft, it can not stop the crime from happening in the first place. Immobilisers, on the contrary, do exactly what is Ghost Immobiliser they say on the tin: they disable your car's motor so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your vehicle.

The ghost device utilizes the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be accomplished using the indicator stalk, window or heater buttons. In addition option, there is a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is especially useful when you need to give your car away for valet parking or servicing because the immobiliser will still be active and not deactivated.

The ghost 2 immobiliser fitting near me is an unique and innovative device that works by using your vehicle's buttons rather than as a separate unit. It is not only an effective deterrent to vehicle theft however, it can be used to secure any future vehicles you own. This makes it a much better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost ii immobiliser immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be plugged into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique that car thieves use to get around immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be identified by conventional diagnostic tools. The Autowatch ferrari ghost installer doesn't use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console or door panels, to create a unique disarming sequence. You can make this sequence as long as 20 presses for added security. The iPhone app allows only one, authenticated connection using the pairing code unique to the Ghost and communication between the two is secured.

The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine can only be started when a valid PIN code has been entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit), so you can hand your car to a valet or service without having to enter the code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts electronic signals to disable the system of your vehicle from performing its normal start-up routine until you input a custom passcode. The system can be activated or deactivated by using your smartphone app, without the need for extra wires.

Standard factory immobilisers in vehicles work by having a transponder built into the key, which sends a signal to the ECU. If the correct code is transmitted, the car will start however if the transponder is replaced with one from a different vehicle, the immobiliser won't recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser has been developed by a South African company at the top of the line in vehicle security technology. It protects your car from hacking, key cloning and even key theft. The only way thieves could take your car is by physically towing it away and even then, they would not be capable of driving it.

Ghost utilizes the buttons of your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique PIN code that is changeable that needs to be entered before you can use your car. This is done without additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals so thieves cannot use sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

Ghost is harder to remove than car alarms that require disarming by pressing the buttons. This makes it an excellent complement to a GPS tracker that can assist in locating your car after it has been taken.

Emergency PIN code override

You do not have to look far on social media for stories or videos of vehicles that have been stolen using the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the car without your original keys.

Our Ghost immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It works by creating an individual pin code sequence that is triggered by your buttons on the steering wheel, door panel, and the center console. This unique PIN has to be entered together with your original key fob to stop the vehicle from beginning. The unique override PIN can be found on the black card that you will receive following your installation and is easy to remember since there are no LED indications.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, therefore it isn't able to be identified by modern criminals using diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to a tracking device.

Unlike most other security systems that have a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely through a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode compatible and a great alternative to a tracker having your car in for an electrical fault at the dealers.

Service/Valet Mode

In recent times there has been an rise in the number of vehicles stolen without the owner's keys. It's now more easy than ever to take your joy and pride with the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been cloned.

It directly communicates with your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also prevents the addition of an additional key or replacing the ECU to get around the system, since only the correct PIN code can allow the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits must be entered before you are able to start your car.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being driven away or started if a PIN code isn't entered first. If you're driving away with the device armed the indicator will flash on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code for every attempt to start your car.